TMoIP/ Data Transport / Communication Multiplexer

Model 2360-M20 Serial TTL IO AMC 2-Channel Module
Model 2360-M20 Serial TTL IO AMC 2-Channel Module

The GDP Model 2360-M20 Serial TTL I/O AMC 2 channel module is a pluggable and hotswappable AMC (Advanced Mezzanine Card) module. This module provides the serial and telemetry interfaces to the Model 2360 link modules such as Ethernet and ATM. Channels may be individually controlled as inputs or outputs. Input channels convert the serial data into IP packets for transport across the backplane to link modules. Output channels receive IP packets from the backplane and convert into serial clock and data.

The M20 is designed to operate in the GDP Model 2360 MicroTCA system. This complete communication system is scalable and can be field configurable to transport a large selection of data channels over various network types. The Model 2360 is developed around an open-standard architecture that is designed to deliver high performance at an affordable cost with the specific purpose of addressing the next generation of “carrier grade” communications applications. This equipment incorporates the latest trends in high speed interconnect technologies, next generation processors, and improved reliability, availability and serviceability.

The Model 2360 includes an open-standard health and monitoring capability that allows the user to monitor any unit connected to the network. Users will experience instant access to power status, fan speeds, temperatures and voltage levels. Custom alarms can be set to ensure an instant alert in the event of any issue.

Our use of open standards ensures the longevity of the provided solution, which greatly reduces the long-term risks associated with proprietary architectures.

  1. Single mid-sized AMC module
  2. 2 independent input / output channels
  3.      • Software selectable channel direction
  4. TTL level signals with BNC connectors
  5. NRZ-L data with 0° or 180° clock
  6. Selectable IRIG 200-04 B120 time input
  7. Optional input clock recovery
  8. Optional frame synchronizer
  9. Channel bit rate from 40 bps to 30 Mbps
  10. Automatic data rate tracking
  11. Tunable Latency
  12.      • 3 msec to 400 msec
  13. 50 or 75 ohm input termination
  14. Remote health and monitoring
  15.      • Temperature, Voltage Levels, etc.
         • IPMI Compliant
  16. Supports RCC standard 218-07 TMoIP
  17. RS-422 Differential available with Triax connectors with the M21 module
  18. IRIG Time available with the M22 module
Electrical
2 independent channels of TTL-level synchronous serial Data and Clock:


0 or 180 degree clock (software selectable)
40 bps to 30 Mbps per channel
Each channel configurable as an input or output
Qty. 4 BNC connectors
50 or 75 Ohm input impedance (software selectable)

Mechanical
Single Mid-size AMC Module
180.6mm X 73.5mm (7.1 in x 2.9 in)
PICMG AMC.0, Spec R2.0

Remote Interfacing
Health & Monitoring:
IPMI Version 1.5 according to AMC.0
On-board MMC (Module Management Controller)
Control through system CPU
SNMP version 3
Web based
CLI

Environmental
Operating
Temperature:
0°C to +55°C
Relative Humidity:
5% to 95% non-condensing (operating)

Non-operating
Temperature:
-40°C to +85°C (storage)
Relative Humidity:
5% to 95% non-condensing (storage)