TMoIP/ Data Transport / Communication Multiplexer

Model 2360-M10 ATM Network Link Interface Module
Model 2360-M10 ATM Network Link Interface Module

The GDP Model 2360-M10 ATM Network Link Interface module is a pluggable and hot-swappable AMC (Advanced Mezzanine Card) module. The M10 is a full duplex telecommunications interface module that is designed to collect data from various channel I/O modules and distribute over an ATM network while simultaneously collecting ATM cells from other edge devices on the same network.

The Model 2360-M10 is designed to operate in the GDP Model 2360 MicroTCA system. This complete communication system is scalable and can be field configurable to transport a large selection of data channels over various network types. The Model 2360 is developed around an open-standard architecture that is designed to deliver high performance at an affordable cost with the specific purpose of addressing the next generation of “carrier grade” communications applications. This equipment incorporates the latest trends in high speed interconnect technologies, next generation processors, and improved reliability, availability and serviceability.

The Model 2360 includes an open-standard health and monitoring capability that allows the user to monitor any unit connected to the network. Users will experience instant access to power status, fan speeds, temperatures and voltage levels. Custom alarms can be set to ensure an instant alert in the event of any issue.

Our use of open standards ensures the longevity of the provided solution, which greatly reduces the longterm risks associated with proprietary architectures.

  1. Single mid-sized AMC module
  2. 2 independent OC3c/STM1 fiber interfaces
  3.      • Also configurable as a single OC12c/STM4
  4. SFP optical connectors
  5.      • Easily switch between singlemode and multimode fiber
         • Supports multiple connector types
         • Selectable output power to drive various distances
             • <1km to 80km
  6. Supports Permanent Virtual Connection Channel (PVCC)
  7. Supports Permanent Virtual Connection Path (PVCP)
  8. Quality of Service support for:
  9.      • Constant Bit Rate (CBR) provisioning
         • Unspecified Bit Rate (UBR) provisioning
         • Cell Delay Variation Timing (CDVT)
         • Peak Cell Rate (PCR)
         • Auto-adaptive to cell rate
         • Cell Loss Priority (CLP) provisioning
         • AAL1 and AAL5 adaptation layers
         • Early Packet Discard
         • ATM traffic policing
         • ATM traffic shaping
  10. ATM Cell Emulation Service (CES)
  11.      • Provisions structured and unstructured ATM circuits
  12. Remote health and monitoring
  13.      • Temperature, Voltage Levels, etc.
         • IPMI Compliant
  14. Supports Loopback modes
  15. System timing may be recovered from SONET clock
Electrical
Two OC3 or One OC12
155Mbps per OC3 channel
622Mbps per OC12 channel
SFP cages for user SFP modules

Remote Interfacing
Health & Monitoring:
IPMI Version 1.5 according to AMC.0
On-board MMC (Module Management Controller)
Control through system CPU

SNMP version 3
Web based
CLI

Mechanical
Single Mid-size AMC Module
180.6mm X 73.5mm (7.1 in x 2.9 in)
PICMG AMC.0, Spec R2.0

Environmental
Operating
Temperature:
0°C to +55°C
Relative Humidity:
5% to 95% non-condensing (operating)

Non-operating
Temperature:
-40°C to +85°C (storage)
Relative Humidity:
5% to 95% non-condensing (storage)