Data Conversion and Distribution

Model 9200-V1V3 Video In to Video Output Module
Model 9200-V1V3 Video In to Video Output Module

The GDP Model 9200-V1V3 Data Conversion and Distribution Module is one of the functional and hot-swappable modules that can be incorporated into the 9200 Series Chassis. The 9200-V1V3 Composite Video Output Module has one BNC for Video Input, and three BNC connectors for Video output on the front panel. Video received at the front panel, or Video selected from the Daisy Chain or Global buses, can be selected for the output. The Video input can be connected to the Daisy Chain bus. The Daisy Chain bus can be extended to a module in the next slot (n=1) for further conversion and distribution by other modules residing in the chassis.

Figure 1 shows a functional block diagram of the Model 9200-V1V3.

The Model 9200 Data Conversion and Distribution System is a modular product that is scalable and user configured to convert and/or distribute a large selection of data channels to satisfy a wide variety of data signal conversion and distribution functions. The 9200 chassis has 16 single height card slots to house the large selection of 9200 series modules. The 9200 series modules provide the ability to accept and properly terminate a variety of signal types and then convert these signals to other industry standards.

The chassis provides global and daisy chain buses so that signals can be received by one module and then sent to other modules in the chassis to satisfy signal conversion and distribution requirements. This concept provides a cost effective and flexible solution to a wide range of signal conversion and distribution applications such as level conversion, signal inversion, code conversion, time code distribution, fiber optic transport, and optical isolation.

  1. Composite Video Input
  2.      • 1 Vpp, 75 Ohm
         • BNC Connector
  3. Three Composite Video Outputs
  4.      • BNC Connectors
         • 75 Ohm Output
  5. Bus Selectors: Daisy Chain/Global Bus
  6.      • Input to Selected Bus
         • Input or Selected Bus to Outputs
  7. Selectable Bus Extension
  8. Front Panel LED Status Indicators
  9.      • J1-J4 Signal Activity
         • Two Composite Signal Activity
         • Power
  10. Pluggable, Hot Swappable
  11. Remote Control (Option)

ELECTRICAL
One Composite Video Input, BNC, J1:

1 Vpp w/75 Ohm Termination (Selectable)
Three Composite Video Outputs, BNC, J2-J4:

Output Impedance, 75 Ohms
Signal Level, +/- 1.5V into 75 Ohm
Bus Selectors:
Daisy Chain/Global Bus
Selector 1: Input to Selected Bus
Selector 2: Input or Selected Bus to Outputs
Selectable Daisy Chain Bus Extension

LED Status Indicators:
Four Output Activity Indicators (J1-J4)
ACT (Green):
Signal OK (Composite)
LOS (Red):
No signal (Composite)
P (Blue):
Power

Remote Control
Requires 9200-HSC1 System Option

MECHANICAL
2.9"(w) x 0.75"(h) x 7.1"(d)
Hot Swappable
Pluggable w/Card Edge Connector
Card-Lock/Extraction Handle

ENVIRONMENTAL
Operating
Temperature:
0°C to +55°C
Relative Humidity:
5% to 95% non-condensing (operating)

Non-operating
Temperature:
-40°C to +85°C (storage)
Relative Humidity:
5% to 95% non-condensing (storage)