Data Conversion and Distribution

Model 9200-9162 ECL Data and Clock over Fiber
Model 9200-9162 ECL Data and Clock over Fiber

The GDP Model 9200-9162 Data Conversion and Distribution Module is one of the functional and hot-swappable modules which can be incorporated into the 9200 Series Chassis. The 9200-9162 Module can be user configured as a transmit module to accept one pair of synchronous ECL level data and clock signals on SMA connectors, combine both data and clock into a single stream, and output this stream over a single fiber optic link via an SFP fiber module. A second 9200-9162 module can be user configured as a receive module to accept the fiber optic link from a Model 9200-9162 transmit module and re-create the synchronous ECL level data and clock signals on SMA connectors.

The Model 9200 Data Conversion and Distribution System is a modular product that is scalable and user configured to convert and/or distribute a large selection of data channels to satisfy a wide variety of data signal conversion and distribution functions. The 9200 chassis has 16 single height card slots to house the large selection of 9200 series modules. The 9200 series modules provide the ability to accept and properly terminate a variety of signal types and then convert these signals to other industry standards.

The chassis provides global and daisy chain buses so that signals can be received by one module and then sent to other modules in the chassis to satisfy signal conversion and distribution requirements. This concept provides a cost effective and flexible solution to a wide range of signal conversion and distribution applications such as level conversion, signal inversion, code conversion, time code distribution, fiber optic transport, and optical isolation.

  1. Two ECL level inputs
  2.      • Synchronous data/clock
         • SMA connectors
  3. Selectable input impedance
  4.      • 120 Ohm
         • High impedance
  5. Fiber Optic output
  6.      • SFP module
  7. Pluggable
  8. Hot Swappable
  9. 100 kbps t150 Mbps
  10. 5 LED indicators
  11. Remote control capable
  12. Invert Output Polarity

ELECTRICAL
Two ECL level inputs
SMA connectors
Selectable input impedance:
120 Ohm or high input impedance.
One fiber optic output:

SFP module
Operates 100 kbps to 150 Mbps
Hot Swappable module

5 LED indicators
ACT Green:
Telemetry present
LOS Red:
No optical link
LOS Green:
Optical link is up
LOS Amber:
tx (local) laser is off
PWR Blue:
FPGA is configured

MECHANICAL
2.9" wide
0.75" high
7.1" deep

ENVIRONMENTAL
Operating
Temperature:
0°C to +55°C
Relative Humidity:

5% to 95% non-condensing

Non-operating
Temperature:
-40°C to +85°C
Relative Humidity:

5% to 95% non-condensing