Data Conversion and Distribution

Model 9200-9122 RS-422 Data and Clock over Fiber
Model 9200-9122 RS-422 Data and Clock over Fiber

The GDP Model 9200-9122 Data Conversion and Distribution Module is one of the functional and hot-swappable modules which can be incorporated into the 9200 Series Chassis. The 9200-9122 Module can be user configured as a transmit module to accept one pair of synchronous RS-422 level data and clock signals on Triax connectors, combine both data and clock into a single stream, and output this stream over a single fiber optic link via an SFP fiber module. A second 9200-9122 module can be user configured as a receive module to accept the fiber optic link from a Model 9200-9122 transmit module and re-create the synchronous RS-422 level data and clock signals on Triax connectors.

The Model 9200 Data Conversion and Distribution System is a modular product that is scalable and user configured to convert and/or distribute a large selection of data channels to satisfy a wide variety of data signal conversion and distribution functions. The 9200 chassis has 16 single height card slots to house the large selection of 9200 series modules. The 9200 series modules provide the ability to accept and properly terminate a variety of signal types and then convert these signals to other industry standards.

The chassis provides global and daisy chain buses so that signals can be received by one module and then sent to other modules in the chassis to satisfy signal conversion and distribution requirements. This concept provides a cost effective and flexible solution to a wide range of signal conversion and distribution applications such as level conversion, signal inversion, code conversion, time code distribution, fiber optic transport, and optical isolation.

  1. Fiber Optic
  2.      • Input (9200-9122)
         • Output (9200-2291)
         • SFP module
  3. Data/Clock
  4.      • RS-422 Compatible
         • 100 Ohm Input Termination
         • TRIAX connectors
  5. Pluggable, Hot Swappable
  6. 100 kbps to 50 Mbps
  7. Invert Output Polarity
  8. LED Status Indicators
  9. Remote Control (Option)

ELECTRICAL
Fiber Optic:
SFP module
SFP module:
RS422 Compatible
100-Ohm Input Termination
TRIAX connectors
Operates 100 kbps to 50 Mbps
Hot Swappable module

Three LED Indicators, ACT, LOS, P
ACT:
Green: Telemetry present
LOS:
Optical Link Status
Red: No optical link
Green: Optical link is up
Amber: Laser is off
P :
Blue: Power Applied

MECHANICAL
2.9” wide
0.75” high
7.1” deep

ENVIRONMENTAL
Operating Temperature:

0 degrees C to +55 degrees C
Operating Relative Humidity:

5% to 95% non-condensing
Non-operating Temperature:

-40 degrees C to +85 degrees C
Non-operating Relative Humidity:

5% to 95% non-condensing