Data Conversion and Distribution

Model 9200-8183 1 Time Code In / 3 Time Code Out Module
Model 9200-8183 1 Time Code In / 3 Time Code Out Module

The GDP Model 9200-8183 Data Conversion and Distribution Module is one of the functional and hot-swappable modules which can be incorporated into the 9200 Series Chassis. The 9200-8183 Module accepts one IRIG time code signal on a BNC connector, and outputs three copies for distribution in on BNC connectors. Simultaneously, the input signal drives the daisy chain buses for further selective conversion and distribution by other modules residing in the chassis. With the proper jumper settings, the module also drives either of two global buses on the 9200 chassis backplane for mass distribution to other output modules.

The Model 9200 Data Conversion and Distribution System is a modular product that is scalable and user configured to convert and/or distribute a large selection of data channels to satisfy a wide variety of data signal conversion and distribution functions. The 9200 chassis has 16 single height card slots to house the large selection of 9200 series modules. The 9200 series modules provide the ability to accept and properly terminate a variety of signal types and then convert these signals to other industry standards.

The chassis provides global and daisy chain buses so that signals can be received by one module and then sent to other modules in the chassis to satisfy signal conversion and distribution requirements. This concept provides a cost effective and flexible solution to a wide range of signal conversion and distribution applications such as level conversion, signal inversion, code conversion, time code distribution, fiber optic transport, and optical isolation.

  1. One IRIG Time Code Input
  2.      • Connect to Outputs & Analog Busses
         • Selectable Input Impedance: 75 Ohm/High
         • BNC connector
  3. Three IRIG Time Code Outputs
  4.      • Connect to Input or Analog Busses
         • Output Impedance: 75 Ohm
         • BNC connectors
  5. Carrier Frequencies to 1 MHz
  6. Front Panel LED Status Indicators
  7.      • J1 Input and J2-J4 Outputs
         • Two for Composite Signal Activity
         • Power
  8. Selectable Bus Extension
  9. Pluggable, Hot Swappable
  10. Remote Control (Option)

ELECTRICAL
One Time Code Input, J1, IRIG A, B, G
Selectable Input Termination:

75 Ohm
Bus Selector 1:
Input to Analog/Global Bus
BNC Connector

Three IRIG Time Code Outputs, J2, J3, J4
Bus Selector 2:
Input or Analog/Global Bus
75 Ohm Back Termination
Output Level:
+/- 1.5V into 75 Ohm
BNC Connectors
Selectable Bus Extension

LED Status Indicators:
Input (J1)/Output Activity Indicators (J2-J4)
ACT (Green):
Signal OK (Composite)
LOS (Red):
No signal (Composite)
P (Blue):
Power

Remote Control
Requires 9200-HSC1 System Option

MECHANICAL
2.9"(w) x 0.75"(h) x 7.1"(d)
Hot Swappable
Pluggable w/Card Edge Connector
Card-Lock/Extraction Handle

ENVIRONMENTAL
Operating
Temperature:
0°C to +55°C
Relative Humidity:
5% to 95% non-condensing (operating)

Non-operating (storage)
Temperature:
-40°C to +85°C
Relative Humidity:
5% to 95% non-condensing