Data Conversion and Distribution

Model 9200-2000 RS-422 Input Conversion Distribution Modules
Model 9200-2000 RS-422 Input Conversion Distribution Modules

The GDP Model 9200-2000 series RS-422 Input Distribution and Conversion Modules accept and convert RS-422 level input signals and provide one or more copies of these signals at various signal levels while simultaneously providing these signals to the buses on the backplane for mass distribution. The 2000 series modules are pluggable and hot-swappable. Refer to figure 1 on the next page for a sample block diagram of the Model 9200-2000 series modules.

The Model 9200-2000 series modules are designed to operate in the GDP Model 9200 Conversion and Distribution chassis. The Model 9200 is a modular product that is scalable and can be user configured to convert and/or distribute a large selection of data channels. These units are designed to be a cost-effective and flexible solution to a wide range of signal conversion and distribution applications.

The 2U 19” rackmount unit can hold up to 16 various single-height modules, each with the ability to accept and properly terminate a variety of signal types and then convert these signals to other industry standards. The chassis also provides a variety of global and daisy-chain buses so that signals can be received by one module and then sent to other modules in the chassis to address signal distribution applications. This equipment incorporates the latest trends in high speed interconnect technologies, next generation processors, and improved reliability, availability and serviceability.

  1. Single height module
  2. Hot swappable
  3. Up to 35 Mbps operation
  4. Independent input channels
  5.      • RS-422 level signals
         • Triax connectors
         • 120 Ohm input termination
         • Activity LEDs
  6. Independent output channels
  7.      • TTL
         • RS-422
         • RS-232
         • ECL
         • LVDS
         • Fiber optics
         • RS-530
         • RS-485
  8. Low throughput latency
  9.      • <10 msec
  10. Input and Output Inversion
  11.      • Jumper selectable
         • Remotely selectable
  12. Drives the backplane buses
  13.      • Daisy chain bus
         • Global bus
Electrical
1 or more independent channels of RS-422 level signals
0 bps to 35 Mbps per channel
Triax connectors
120 Ohm input impedence

Mechanical
180.6mm x 73.5mm (7.1” x 2.9”)

Remote Interfacing
Ethernet Remote Control (optional)

ENVIRONMENTAL
Operating
Temperature:
0°C to +55°C
Relative Humidity:
5% to 95% non-condensing (operating)

Non-operating
Temperature:
-40°C to +85°C (storage)
Relative Humidity:
5% to 95% non-condensing (storage)