Data Conversion and Distribution

Model 9200-1123 1 TTL Input / 3 RS-422 Output Module
Model 9200-1123 1 TTL Input / 3 RS-422 Output Module

The GDP Model 9200-1123 Data Conversion and Distribution Module is one of the functional and hot-swappable modules which can be incorporated into the 9200 Series Chassis. The 9200-1123 Module accepts one TTL level data signal on a BNC connector, and outputs three copies for distribution in RS-422 format on TRIAX connectors. Simultaneously, the input signal drives a daisy chain bus for further selective conversion and distribution by other modules residing in the chassis. With the proper jumper settings, the module also drives either of two global buses on the 9200 chassis backplane for mass distribution to other output modules.

The Model 9200 Data Conversion and Distribution System is a modular product that is scalable and user configured to convert and/or distribute a large selection of data channels to satisfy a wide variety of data signal conversion and distribution functions. The 9200 chassis has 16 single height card slots to house the large selection of 9200 series modules. The 9200 series modules provide the ability to accept and properly terminate a variety of signal types and then convert these signals to other industry standards.

The chassis provides global and daisy chain buses so that signals can be received by one module and then sent to other modules in the chassis to satisfy signal conversion and distribution requirements. This concept provides a cost effective and flexible solution to a wide range of signal conversion and distribution applications such as level conversion, signal inversion, code conversion, time code distribution, fiber optic transport, and optical isolation.

  1. One TTL level input
  2.      • BNC connector
  3. Selectable input impedance
  4.      • 50 Ohm
         • 75 Ohm
         • High impedance
  5. Three RS-422 outputs
  6.      • TRIAX connectors
  7. Pluggable
  8. Hot Swappable
  9. Up t35 Mbps
  10. Drives the Daisy Chain bus
  11. Can drive the Global buses
  12. 3 LED indicators
  13.      • Signal OK
         • No signal
         • Power
  14. Remote control capable
  15. Invert Output Polarity
ELECTRICAL
One TTL level input
BNC connector
Selectable input impedance:

50 Ohm, 75 Ohm, or high input impedance.

Three independently driven RS-422 level outputs
TRIAX connectors

Operates up to 35 Mbps
Hot Swappable module
Drives Daisy Chain bus
Can drive Global backplane buses

3 LED indicators
Green:
Signal OK
Red:
No signal
Blue:
Power

MECHANICAL
2.9" wide
0.75" high
7.1" deep

ENVIRONMENTAL
Operating
Temperature:
0°C to +55°C
Relative Humidity:
5% to 95% non-condensing

Non-operating
Temperature:
-40°C to +85°C
Relative Humidity:
5% to 95% non-condensing