Data Conversion and Distribution

Model 9200-00V4 Composite Video Output Module
Model 9200-00V4 Composite Video Output Module

The GDP Model 9200-00V4 Data Conversion and Distribution Module is one of the functional and hot-swappable modules that can be incorporated into the 9200 Series Chassis. The 9200-00V4 Composite Video Output Module has four BNC connectors on the front panel for distribution of Composite Video outputs. With the proper Bus Selector jumper settings, Video signals can be selected from either the Analog Daisy Chain or Global buses on the 9200 System chassis backplane. The Daisy Chain bus can be extended to a module in the next slot (n=1) for further conversion and distribution by other modules residing in the chassis.

The Model 9200 Data Conversion and Distribution System is a modular product that is scalable and user configured to convert and/or distribute a large selection of data channels to satisfy a wide variety of data signal conversion and distribution functions. The 9200 chassis has 16 single height card slots to house the large selection of 9200 series modules. The 9200 series modules provide the ability to accept and properly terminate a variety of signal types and then convert these signals to other industry standards.

The chassis provides global and daisy chain buses so that signals can be received by one module and then sent to other modules in the chassis to satisfy signal conversion and distribution requirements. This concept provides a cost effective and flexible solution to a wide range of signal conversion and distribution applications such as level conversion, signal inversion, code conversion, time code distribution, fiber optic transport, and optical isolation.

  1. Four Composite Video Outputs
  2.      • BNC Connectors
         • 75 Ohm Output
  3. Selectable Bus Signal Source
  4.      • Bus Selector 1: J1, J3 Output
         • Bus Selector 2: J2, J4 Output
  5. Selectable Bus Extension
  6. Front Panel LED Status Indicators
  7.      • J1-J4 Outputs
         • Two Composite Signal Activity
         • Power
  8. Pluggable, Hot Swappable
  9. Remote Control (Option)

ELECTRICAL
Four Composite Video Outputs, J1-J4:

Output Impedance, 75 Ohms
Signal Level, ± 1.5V into 75 Ohm
Connectors, BNC
Signal Source:
Daisy Chain/Global Bus
Bus Selector 1: J1, J3 Output
Bus Selector 2: J2, J4 Output
Selectable Bus Extension
LED Status Indicators:
Four Output Activity Indicators (J1-J4)
ACT (Green): Signal OK (Composite)
LOS (Red): No signal (Composite)
P (Blue): Power
Remote Control
Requires 9200-HSC1 System Option

MECHANICAL
2.9"(w) x 0.75"(h) x 7.1"(d)
Hot Swappable
Pluggable w/Card Edge Connector
Card-Lock/Extraction Handle

ENVIRONMENTAL
Operating
Temperature:
0°C to +55°C
Relative Humidity:
5% to 95% non-condensing (operating)

Non-operating
Temperature:
-40°C to +85°C (storage)
Relative Humidity:
5% to 95% non-condensing (storage)