Data Conversion and Distribution

Model 9200-0014 4 TTL Output Module
Model 9200-0014 4 TTL Output Module

The GDP Model 9200-0014 Data Conversion and Distribution Module is one of the functional and hot-swappable modules which can be incorporated into the 9200 Series Chassis. The 9200- 0014 module accepts input signals from other modules in the 9200 chassis via the Global and Daisy Chain buses, and outputs four TTL level signals on BNC connectors. The input signals from the Daisy Chain bus are repeated to the subsequent card slots for further selective conversion and distribution by other modules residing in the chassis.

The Model 9200 Data Conversion and Distribution System is a modular product that is scalable and user configured to convert and/or distribute a large selection of data channels to satisfy a wide variety of data signal conversion and distribution functions. The 9200 chassis has 16 single height card slots to house the large selection of 9200 series modules. The 9200 series modules provide the ability to accept and properly terminate a variety of signal types and then convert these signals to other industry standards.

The chassis provides global and daisy chain buses so that signals can be received by one module and then sent to other modules in the chassis to satisfy signal conversion and distribution requirements. This concept provides a cost effective and flexible solution to a wide range of signal conversion and distribution applications such as level conversion, signal inversion, code conversion, time code distribution, fiber optic transport, and optical isolation.

  1. Four TTL level outputs
  2.      • BNC connectors
         • Selectable Output Polarity, Normal/Invert
         • Data Rates, DC to 35 Mbps
         • TTL Compatible Signal Outputs
  3. Selectable Bus Signal Source
  4.      • Bus Selector 1: J1, J3 Output
         • Bus Selector 2: J2, J4 Output
  5. Selectable Bus Extension
  6. Pluggable, Hot Swappable
  7. Front Panel LED Status Indicators
  8.      • Two for Composite Signal Activity
         • Power
  9. Remote Control (Option)

ELECTRICAL
Four TTL Output, J1-J4

Data Rates to 35 Mbps
Output Impedance, <50 Ohms
Signal Level, TTL Compatible
Output Polarity, Normal/Invert
Connectors, BNC
Signal Source:
Daisy Chain/Global Bus
Bus Selector 1: J1, J3 Output
Bus Selector 2: J2, J4 Output
LED Status Indicators:

ACT (Green): Signal OK (Composite)
LOS (Red): No signal (Composite)
P (Blue): Power
Selectable Bus Extension
Remote Control
Requires 9200-HSC1 System Option

MECHANICAL
2.9"(w) x 0.75"(h) x 7.1"(d)
Hot Swappable
Pluggable w/Card Edge Connector
Card-Lock/Extraction Handle

ENVIRONMENTAL
Operating
Temperature:
0°C to +55°C
Relative Humidity:
5% to 95% non-condensing (operating)

Non-operating
Temperature:
-40°C to +85°C (storage)
Relative Humidity:
5% to 95% non-condensing (storage)