Best Source Selectors (Diversity Combining)

Model 2265EC Bit Synchronizer BSS Remote Encapsulation Unit
Model 2265EC Bit Synchronizer BSS Remote Encapsulation Unit

The GDP Model 2265EC Multi-Channel PCM Bit Synchronizer / Encapsulator houses up to 4 high performance bit synchronizer channels in a 2U chassis. The optimized digital design of this unit affords the highest performance characteristics currently available. This unit can be used as a stand-alone bit synchronizer and as a data Encapsulator for the GDP Diversity Combiner / Best Source Selector products.

The Model 2265EC is capable of maintaining synchronization with the signal of interest down to –3 dB Eb/No at signal levels down to 100mVpp. When searching for the signal, acquisition is attainable in less than 50 bits. The unit is very robust and can maintain synchronization for a period of at least 256 bit periods without a transition.

The standard IRIG randomizer/derandomizer for both forward and reverse sequences is provided. CCITT V.35 and V.36 scrambling/ descrambling is also provided. A variety of Viterbi decoders are available including R1/2 K7 (Std), R3/4 K7 and R1/3 k7 (please inquire for other FEC options).

To assure synchronization to the intended data stream, the Frame Pattern Detector may be invoked. Up to a 64-bit long pattern is detected. Maintaining synchronization with this pattern at the programmed repetition rate and synchronization strategy produces a lock signal. An Automatic Polarity Correction (APC) mode is also provided for inverted data.

Each of the channels include three Analog inputs. Each channel provides outputs that include; TTL Coded PCM & TTL Encapsulated output. Each data output is associated with a coherent clock that is programmable to 0, 90, 180 and 270 degrees.

Reconstructed data and data quality information is assembled into a transfer frame (ENCAPSULATION). This transfer frame is suitable for passage by way of a data link to a GDP Best Source Selector. In this way the data quality information that is available at the first point of signal reception, is passed to a remote location where the Best Source Selector makes its decisions.

The MD2265EC includes several unique features to determine the quality of the data. The first is an Eb/No (Signal Quality) measurement. From this measurement the error rate of the data can be determined. The MD2265EC also provides measured errors in the embedded PCM frame synchronizer pattern, if present, as well as errors in the Viterbi stream when these modes are enabled. A bit-error-rate (BERT) function is also provided that allows link test in a short loop-back to verify proper operation of the module, or long loop-back to measure performance of the link. An advanced lock detector ensures a solid lock indication for the module.

The Auto Scan feature is available to scan the input for up to 8 combinations of bit rates, input codes and frame patterns (per Bit Sync). When one of the signals is present the Bit Sync automatically locks onto it and recovers the data and clock.

  1. Up to 4-Channels per 2U Box
  2. Bit Rates
  3.      • 5 bps to 20 Mbps
         • 5 bps to 40 Mbps (Opt)
  4. ENCAPSULATOR for a GDP
  5. Best Source Selector
  6. Performance within 1 dB of theory
  7. Loop Bandwidth Settings from
  8. 0.01% to 1.6%
  9.      • Extended LBW Range (Opt)
  10. Accepts NRZ-L/M/S, BiØ-L/M/S,
  11. DM-M/S; MDM-M/S
  12. Randomizer/Derandomizer
  13. Scrambler/Descrambler
  14.      • CCITT V.35/36
  15. Viterbi Decoder
  16. Frame Pattern Detector
  17. Input Signal Status
  18.      • Sync and Loss
         • Measured Bit Rate
         • Measured Signal Level
         • Input Data Polarity
  19. Signal/Data Quality Status
  20.      • Eb/No Measurement
         • Frame Sync Pattern Error Rate (BER Status)
         • Viterbi Error Rate
         • BERT/ PRN BER Measurement
  21. Date Generator/Simulator
  22.      • Serial and QPSK(Opt)
  23. Advanced Lock Detection
  24. Auto Bit-Rate Scan (Opt)
  25.      • QPSK/OQPSK/SOQPSK/AQPSK
         • QPSK Resequencer (Opt)
  26. Remote Control via.
  27.      • RS-232 (Std)
         • IEEE-488, E-net (Opt)
  28. 3.5 -inch High Rack-Mount
  29. Chassis
Inputs, Each Bit Sync
Analog Inputs
Three (3) Data Inputs, selectable, for each synchronizer channel
Timing Input (Encapsulation)
One (1) 1-pps (TTL)
Input Termination
Selectable: 75Ω (50Ω Optional) or 10k Ω
Signal Amplitude
0.1 Vp-p to 10 Vp-p not to exceed ±10 V

Performance
Bit Rate Range
5bps to 20 Mbps (40 Mbps Optional)
Tuning Resolution
X.XXXEN(1≥N≥7)
DC Offset
DC Offset + peak signal level not to exceed max. Signal Amplitude.
AC Offset
No degradation up to 100% of input signal at 0.1% of the bit rate.
Loop Bandwidth
0.01% to 1.6% (Extended LBW Range Optional)
Acquisition Range
2x LBW
Sync Acquisition Threshold
SNR 0 dB
Sync Maintenance
SNR –3dB
Sync Acquisition
< 50 bits
Sync Retention
256 bits without transitions
Bit Error Rate
1 dB to 40 Mbps

Features
Input/Output PCM Codes
NRZ-L/M/S, BIØ-L/M/S, DBIØ-M/S, DM-M/S; MDM-M/S
Randomizer/Derandomizer
IRIG 106 forward and reverse
Descrambler
CCITT V.35/V.36
Viterbi Decoder
R 1/2, K 7 with G1/G2 Swap and G2 Invert, (others available)
Resequencer
QPSK/OQPSK/SOQPSK (Optional)
Frame Pattern Detector
Up to 64 bits with programmable strategy and APC
Auto Scan (Optional)
Searches up to 8 Bit Rate, Code, Frame pattern combos per Bit Sync
Output Data Polarity
Input polarity normal / inverted.
Output Clock Phase
0, 90, 180 & 270 degrees
BERT Function
Bit-Error-Rate PRN Generator/Error Detector (Option)
Encapsulation
Compatible with GDP Best Source Selector, up to 2-channels

Outputs, each Bit Sync Channel
TTL (Each Channel)
Reconstructed Data & Clock; Encapsulated Data & Clock; Sync; Loss
RS422 (Each Channel)
Reconstructed Data & Clock; Encapsulated Data & Clock
Bipolar Tape Output (Each Channel)

One +/-1V - Coded PCM
BERT BER Measurement Results on Front Panel Display and Remote Control Port