Latest News

NEW Compact, Dual Stream Portable Telemetry Processing System

April 02, 2018

Acroamatics' new Model 4032AP Compact Dual Portable Stream Telemetry Processing System is a size and cost effective   "multi-function" dual stream PCM simulator, decom, and recording solution. It is capable of ingesting, simulating, recording, processing, and playback of single-ended and differential baseband PCM, and direct NRZ-L clk/data IRIG Chapter 4 telemetry at rates in excess of 44 Mbps, in all forms. The Model 4032AP enables users to independently decom, simulate, store and display two streams of PCM data using lightning fast Read More >

GDP Delivers Automated TMoIP / DQE Range Acquisition Solution

April 02, 2018

GDP has successfully completed delivery and site checkout of the new Model 2350 Telemetry Gateway and Model 2267 Best Source Selector for a major Naval Test Center. The system provides over 400 channels of TMoIP feeding 20 Best Source Selectors under control of Telemetry Range Management Software (TRMS). Under TRMS control, the 2350s take PCM data from legacy receivers and convert it to Ethernet packets. The 2267s ingest the Ethernet packets and use the new RCC DQE method to perform hitless Read More >

How Does Your Telemetry Receiver Compare?

March 05, 2018

Suffering from near/far signal problems or adjacent channel interference with your telemetry receiver? Problem Solved! GDP's Model 4426 Telemetry Receiver has an exceptionally wide dynamic range, linear at the high end to +5dBm to accommodate high power near field signals, yet with excellent sensitivity at the low end from a noise figure of better than 7dB - an 18dB improvement over your typical receiver! With the 4426's multi AGC/multi SAW filter superhet architecture, out-of-band signals are attenuated below Read More >

NEW Dual Channel PCIe “all-in-one” Telemetry Processing Card

March 05, 2018

The new dual channel 0-80 Mbps Model 1632P PCIe Dual Stream Telemetry Decom Processing Module is the hub of our fourth generation technology based 2018 TDP family product map. Model 1632P supports both networked and standalone PC hosted acquisition and processing environments. It retains all of the capabilities of Acroamatics powerful card embedded telemetry processing technology including low latency dynamic processing, Windows OS application independent processing and output data product formatting, recording, simulation, and both "raw" Read More >

BERT Products Now Support Low Density Parity Check (LDPC)

February 06, 2018

In addition to the diverse set of functions and features currently supported by GDP's Model 650 Data Link Test Set (e.g. Noise, Jitter, Acquisition Time, Link Delay Measurement, and Convolutional Encoding), GDP's BERT products now support the generation of Low Density Parity Check (LDPC) Forward Error Correction (FEC) codes outlined in the new Appendix R of the IRIG106 Telemetry Standard. Over and above the Appendix R codes, the BERT also supports the generation of the CCSDS Near Earth LDPC 7/8 Codes. LDPC is a recently Read More >

Validate Frame Sync Lock on your Incoming Streams

February 06, 2018

The Acroamatics Model 2618P Telemetry Stream Format Validation System supports up to 16 independently programmable channels in a compact 1U rackmount chassis. Each channel has a data/clock input and an independent full function IRIG 106 Chapter 4 frame sync pattern detector with programmable sync strategy (i.e. programmable search/check/lock errors (0 to 15), APC -Auto Polarity control, bit slip window 0 to +/-3). Front panel LEDs provide quick look local lock status. Status of each of Read More >

Want More Processor Power? Add a Processor Slice!

December 27, 2017

Acroamatics' latest Telemetry Data Processor (TDP) products have been enhanced with a redesigned low latency programmable EU processing and data distribution (or Programmable Data Stream Processor - PDSP) card. The PDSP enables users to compose real-time data processing and data output formatting programs through its onboard library of over 400 advanced EU and data conversion algorithms, sourcing measurement data from any stream input to the host TDP system. Features include: NEW High Speed EU processing - Complex scaled, derived, and EU Read More >

Combat the Effects of Multipath Distortion and Fading through Adaptive Equalization

December 13, 2017

GDP Space Systems' newest Multi-Band Range Telemetry Receivers are designed with the latest technology to provide Adaptive Equalization. An Adaptive Equalizer (AEQ) is a filter that automatically adjusts itself to mitigate time varying distortion in a received signal. A properly designed AEQ can be used to combat the effects of multipath distortion and fading on a telemetry signal. True multipath mitigation Fully adaptive/automatic No special transmitter required   Read more about the substantial performance improvements provided by Read More >

GDP President Awarded Best Paper on Telemetry Standards

October 31, 2017

Gary Thom, President of Delta Information Systems, won the Lawrence Rauch Award on October 24, 2017 at the International Telemetry Conference in Las Vegas, NV. Gary's article, "A Proposed Revision to IRIG 218 Based on Real World Experience" was awarded Best Paper on Telemetry Standards. The article reviews experiences from the last decade of designing, installing, troubleshooting and optimizing telemetry data distribution over IP networks. This paper describes a proposed revision to IRIG 218 based on these real life Read More >

4 Reasons to Visit Us at ITC 2017

August 30, 2017

GDP Space Systems and Acroamatics Telemetry Systems have been providing innovative solutions to the telemetry and flight test communities for over 40 years. We are more excited than ever to showcase our latest innovations in aerospace telemetry products and systems at this year’s International Telemetering Conference. Here are 4 reasons why you’ll want to visit GDP and Acroamatics at booth #2041. 1. GDP will be demonstrating the newest Multi-Band Range Telemetry Receivers – designed with Read More >